Going Off-Grid – Reduce Electricity Needs 1

The costs of off-grid systems have come down over the years. However, solar power is still no small investment. But there are significant savings to be had by reducing our electric energy footprint. So, to put first things first, we’ll take a look at ways we can reduce electricity needs….

The costs of off-grid systems have come down over the years. However, solar power is still no small investment. But there are significant savings to be had by reducing our electric energy footprint. So, to put first things first, we’ll take a look at ways we can reduce electricity needs.

This is the sixth episode of the Going Off-Grid series. To start at the beginning, go to Going Off-Grid – Introduction.

See below for notes.

https://rumble.com/embed/vl2m4h/?pub=rk00b

Replace Electrical Devices With More Energy Efficient Ones

Lights

One of the simplest and quickest ways to reduce electricity needs is to replace the old-style incandescent and fluorescent light bulbs with light emitting diodes (LEDs). LEDs have the following benefits:

  1. Maximum Light Efficiency: In the last 5 years alone, LEDs have jumped from around 60 lumens per watt (lm/W) to certain products getting close to 150 lumens per watt. (Lumens per watt is a measure of efficiency, like miles per gallon in a car.) Compare LEDs to compact fluorescent lights (CFLs) with 55-70 lumens per watt, or traditional incandescent bulbs with 13-18 lumens per watt, and the LED advantage is as bright as day. And the technology just keeps getting better and cheaper.
  2. Long-Lasting: They are notable for being extremely long-lasting products. Many LEDs have a rated life of up to 50,000 hours. This is approximately 50 times longer than a typical incandescent, 20-25 times longer than most halogens, and 8-10 times longer than a typical CFL. Used 12 hours a day, a 50,000 bulb will last more than 11 years. Used 8 hours a day, it will last 17 years!
  3. Reduced Heat Output: LED lights have the ability to turn the majority of their energy into light. While this saves electricity, it also means your LED light bulbs are emitting significantly less heat than traditional bulbs. This reduction in heat means your air conditioner won’t have to work as hard during the summer. And many LEDs don’t generate any infrared light, which is also a source of heat.
  4. Durable: Traditional and fluorescents bulbs are made out of fragile glass and must be handled with care. LEDs are manufactured to resist vibrations and impact damage.
  5. Variety: LEDs are commonly referred to as full-spectrum lighting. The bright light they produce improves our perception of our surroundings. In addition, they are available in many light configurations, including UV, infrared and plant lights. They are also available in many base types and sizes.
  6. No Toxic Mercury: You’ve seen the warnings on the boxes of fluorescent tubes; CONTAINS MERCURY! There is an entire protocol for what needs to be done if a fluorescent bulb is broken. LEDs contain no mercury and are overall more durable than fluorescent tubes.

Cree makes some of the best LED lights available. They can be a bit more expensive than other LEDs, but tend to be more efficient, dimmable, longer lasting and don’t have a flicker like some of the cheaper brands:

LED Plant Lights

I also use LED plant lights. I’ve done a lot of experimenting with them and some of the features I look for are:

  1. LEDs that are spread over a broader area to more evenly distribute the light.
  2. Though infrared does not directly help with photosynthesis, the extra warmth does seem to help with seed germination.
  3. Finally, plant LEDs MUST include UV. Again, this has nothing to do with photosynthesis, but it does provide protection against white mold and other fungus and bacteria.

Here is my current go to LED plant light:

Appliances

The EPA’s ENERGY STAR Program was created to help identify the best ways to save energy. The little blue label is an indication that a particular appliance is designed to reduce electricity needs.

Although a highly efficient EnergyStar appliance may cost more upfront, its reduced power consumption means lower costs for building your off-grid system.

However, the Energy Star Program does not identify which appliances are the most efficient, only that they are efficient. To compare the efficiencies of appliances, we don’t just look for the blue label, but the yellow EnergyGuide label.

The EnergyGuide label will help you easily compare the efficiency of appliances So, compare the EnergyGuide labels to determine the most efficient appliances for your home.

Here is a list of the major Energy Star rated appliances we have installed:

  • On-Demand (tankless) Water Heater – covered in detail in next episode
  • Washer & Dryer
  • Chest Freezer
  • Refrigerator
  • Range
  • Dishwater
  • Microwave
  • Air Conditioner

We have other Energy Star appliances, but those are the big ones. I haven’t included the specific models because there are more current models available.

Upcoming Episode

We will continue the current topic, so our next episode will be Reduce Electric Consumption 2.

And, as always, be well.

Similar Posts